Murphy Bed & Specialty Assembly Services

What We Assemble and Install

Murphy beds and wall beds are one of the most frequent requests Coastal gets, and for good reason — they're a wall-mounted mechanism, not just a box of parts, and getting the anchoring wrong turns a convenience into a hazard. Coastal Installations & AV handles that specialty assembly work alongside closet systems, garage storage, home fitness equipment, and appliance placement across San Diego County. General furniture and flat-pack assembly is also in scope and has its own dedicated page for retailer-specific help.

That specialty work is what sets this page apart from the site's furniture-assembly service — anchoring hardware, wall type, swing clearance, and load-bearing safety checks apply to Murphy beds, garage racks, and fitness equipment in a way they don't for a bookcase. Every installation gets confirmed against the wall or floor conditions, leveled, and checked before the crew leaves.

Murphy Beds & Wall Beds

Murphy beds and wall beds are their own category because they aren't just assembly — they're a wall-mounted mechanism that has to be anchored correctly to carry real weight, day after day. That means finding the studs or using the right hardware for the wall type, checking swing clearance, and confirming the mechanism opens and closes smoothly before calling the job done. A wall bed that isn't anchored properly isn't a convenience, it's a hazard, and that's the standard the installation gets held to.

Closet Systems & Garage Storage

Closet systems are where a lot of San Diego County homes gain real storage without an addition or a remodel. Wire and wood-panel closet organizers, adjustable shelving, drawer units, and hanging-rod systems all get installed to fit the actual closet — not just the kit's default configuration. The same logic applies to garage storage: overhead racks, wall-mounted shelving and slat systems, and cabinets, all anchored to actual framing or masonry so the load is carried safely, not just resting on drywall anchors that were never meant to hold it.

Home Fitness Equipment, Appliance Placement & Home Offices

Home fitness equipment — treadmills, ellipticals, home gyms, power racks, and similar — gets the same attention to leveling and safety-critical assembly as anything else on this list. Equipment that shifts or wobbles during use is a safety problem, not a minor inconvenience, so the installation isn't finished until it's stable and checked. Appliance placement covers positioning and connecting appliances like washers, dryers, and similar units where the hookup doesn't require licensed electrical or gas work.

Home office setup is its own frequent request inside this category — desks, standing-desk frames, monitor arms and mounts, filing and storage units, and bookshelves, assembled and arranged so the room actually works as an office rather than just holding office furniture. It's grouped with assembly and installation rather than treated as a separate service because the work itself is the same skill set: build it correctly, mount what needs mounting, and leave the space usable.

IKEA & Flat-Pack Furniture Assembly

IKEA, Wayfair, Crate & Barrel, Costco, and other ready-to-assemble furniture is one of the most common requests in this category. For a deeper look at how that specific work is scoped — including multi-room planning and what to have ready before assembly day — see the dedicated IKEA & Furniture Assembly page.

Storage Sheds & Modular Structures

Prefabricated storage sheds, pergola kits, gazebos, and other modular structures are also part of this category. Site review, anchoring requirements, and what's excluded (grading, foundations, permits) are covered in full on the dedicated Storage Shed & Modular Structure Assembly page.

Built for San Diego County Walls

San Diego County homes bring their own anchoring realities. Interior walls are typically drywall over wood framing, which means finding studs or using rated anchors when a stud isn't available for anything heavy enough to matter — a wall bed, a garage rack, or a floating shelf meant to hold real weight. Some homes, particularly older construction, have plaster or masonry in places, which changes the hardware and technique needed. That is confirmed before anything gets mounted, which is part of why a wall-mounted install takes longer than the box's instructions suggest it should.

What a Coastal Visit Looks Like

Every project starts with a free estimate, requested by phone, text, or through the website, with the items or rooms involved. From there, scope and timing get confirmed before anyone shows up, so there are no surprises about what's included. On the scheduled date, the work gets done at the location, and before the crew leaves, everything gets a walkthrough — checking that furniture is level, wall beds swing and lock properly, shelving is anchored, and the space is left clean.

Why Homeowners Call Coastal

Coastal is led by Miguel Sanchez, who brings more than 20 years of hands-on carpentry experience to every job. That matters most on exactly the items in this category, since anchoring, leveling, and load-bearing installation are carpentry fundamentals, not just following an instruction sheet. Homeowners often call because they are working around a move or renovation timeline, do not want to deal with wall-anchoring decisions that carry real consequences if they are wrong, or simply prefer to spend their weekend doing something other than assembly.

Service Limitations

Coastal's assembly and installation work covers furniture, wall-mounted storage and beds, closet and garage systems, fitness equipment, and appliance placement that doesn't require licensed trade work. New gas lines or gas-line modifications need a licensed plumber; adding a new electrical circuit or outlet needs a licensed electrician; structural changes need a licensed contractor or structural engineer. Any permit-required work should be verified and handled by the appropriately licensed professional before the project starts.

Frequently Asked Questions

Do you assemble furniture from any brand?

Most flat-pack and pre-built furniture is in scope; unusual or highly specialized pieces are confirmed during the free estimate.

Do you assemble products from IKEA, Wayfair, Crate & Barrel, or Costco?

Many products from these and other retailers can be reviewed. Send the product link, model, delivery status, room or site photos, and any manufacturer installation requirements with the estimate request.

Can you assemble a storage shed or modular outdoor structure?

Potentially. The product, dimensions, site condition, access, anchoring, clearances, permit requirements, and any foundation or utility work must be reviewed before the scope is confirmed.

Can you install a Murphy bed on any wall?

Most interior walls can be considered after the wall type is checked during the estimate and the right anchoring hardware is selected.

Do you anchor garage shelving so it can hold real weight?

Shelving is anchored into framing or masonry rather than resting on drywall anchors alone.

What if my appliance needs a new gas or electrical line?

That is outside Coastal's scope. A licensed plumber or electrician is needed, and the requirement is flagged during the estimate.

What should I send with a Murphy bed or specialty assembly estimate?

Room photos, wall measurements, the product link or model, and delivery status help Coastal review wall type and anchoring before scheduling.

How do I get a free estimate?

Call or text (619) 845-4291, available 24/7, or request one through the website.